Undo |
Use it to reverse the last command. If this option is not available, it means there is no action to undo. This software allows virtually unlimited (limited only by hard drive space) levels of Undo. |
Redo |
Use it to repeat your last command or action. |
Select All |
Use it to select the whole audio data. |
Select Exactly |
Enter position time data by hand to select the audio data exactly |
Convert Sample Type |
Use it to convert the sample type of the whole audio data. |
Delete |
Use it to delete the selection. |
Copy |
Use it to copy the selection to the Clipboard. |
Cut |
Use it to remove the selection from the active file and place it on the Clipboard. |
Paste |
Use it to insert the content of the Clipboard at the insertion point or to replace any selection. |
Mix |
Use it to mix any audio data from either the Windows or the Clipboard with the current audio file. |
Zoom In |
Use it to zoom in on the center of the current audio file window. |
Zoom Out |
Use it to zoom out from the current location. |
Zoom Full |
Use it to zoom all the way out to fit the entire waveform or session in the display window. |
Waveform View |
Use it to choose a mode for viewing data: Waveform View or Spectral View. Waveform View displays audio data in the familiar green-on-black sound wave format, where x-axis (vertical) represents amplitude and y-axis (horizontal) represents time. |
Spectral View |
Use it to choose a mode for viewing data: Waveform View or Spectral View. Spectral View displays a waveform by its frequency components, where x-axis is frequency, and y-axis is time. This allows you to analyze your audio data to see which frequencies are most prevalent. |